|
Careers > Job Postings > Fabrication
Fabrication
Finishing Technician II
CNC Mill Machinist I, Swing Shift
____________________________________________________
CNC Mill Machinist/Operator I, Swing Shift
Department: Fabrication
ID# 10-046
Location: Shingle Springs, CA
Reports to: Machine Shop Supervisor
Travel Required: None
Position Summary
The CNC Mill Machinist/Operator, under close supervision, with specific instructions, and pre-established guidelines, performs a variety of basic machinist duties. He/she assembles, repairs, and fabricates metal parts by operating various types of manual, numerically controlled, and computerized machine shop mechanical equipment.
Essential Job Functions
To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skills, and abilities required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions.
- Operates mill machines per instructions.
- Loads raw material into fixtures and “starts” machining process.
- Inspects features of the machined part with Supervisor.
- Documents work with use of calipers and micrometers.
- Other applicable duties, as assigned or required.
Minimum Requirements
- High School diploma or equivalent.
- Up to three (3) years of machine shop experience.
- Team player attitude.
- Excellent work ethic and dependability.
- Ability to work overtime, as required.
Preferred Qualifications
- Up to three (3) years operation of horizontal mill machine.
- Familiar with machining industry terminology.
- Familiar with measuring tools (basic operation of a variety of hand tools and equipment), such as calipers and micrometers.
- Mechanical aptitude for commonly used concepts and practices (machining process of fixturing a piece of material in a machining tool)
- Takes direction from others to implementation of process.
- Basic computer skills with Email and web browser navigation
- Ability to follow inspection practices.
- Maintain accurate record keeping and document procedures.
Physical Requirement
- While performing the duties of this job, the employee is regularly required to use hands and arms to perform repetitive motions.
- To sit, to talk, and/or to hear.
- Must be able to lift up to 50 lbs., as required.
- The noise level in the work environment is moderate.
- Frequent standing and sitting.
- Required to work on concrete floors, wearing steel toe shoes and safety goggles, up to 10-12 hours per day.
- RETURN TO TOP -
____________________________________________________
Finishing Technician II
Department: Fabrication
ID# 10-052
Location: Shingle Springs, CA
Reports to: Machine Shop Supervisor
Travel Required: None
Position Summary
A Finishing Technician takes machined parts, in raw or unfinished state, and uses a variety of processes to “finish” the part.
Essential Job Functions
To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skills, and abilities required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions.
- Operation of standard finishing equipment:
- Drill Press
- Buffer
- Grinder
- Tumbling Machines with abrasives
- Miscellaneous hand tools
- Advanced ability to perform the following job functions:
- Finishing edge breaks, tapping, and chamfering
- Surface finishing including - grinding, sanding, sandblasting, and/or polishing to specification
- Strong attention to detail and focus on cosmetics of the part.
- Reviews blue prints for part features.
- Utilization of standard shop inspection equipment and inspects the work piece to ensure print dimensions are maintained.
- Completes documentation while following specified processes.
- Interaction with machinists, quality control and other machine shop personnel.
Minimum Requirements
- High school diploma or equivalent.
- Five (5) or more years of experience in fabrication/machining environment.
- Ability to read and interpret drawings and specifications.
- Good motor skills and dexterity.
- Able to multitask in a fast-paced and deadline-driven environment.
- Understanding of the manufacturing process and timelines.
- Mechanical aptitude.
- Team-player attitude.
- Takes pride in workmanship.
- Excellent work ethic and dependability.
- Ability to work overtime, as required.
Physical Requirement
- While performing the duties of this job, the employee is regularly required to use hands and arms to perform repetitive motions.
- To sit, to talk, and/or to hear.
- Must be able to lift up to 50 lbs., as required.
- Frequent standing and sitting.
- Required to work on concrete floors, wearing steel toe shoes and safety goggles, up to 10-12 hours per day.
- Ability to work in a loud environment.
- RETURN TO TOP -
____________________________________________________
SPACER WITH BAR
| 
